| SG–455 |
| WIDE TEMPERATURE RANGE MULTI APPLICATION SYNTHETIC GREASE |
|
SELCO SG-455 synthetic greases provide the following advantages when compared with mineral oil greases intended for similar service :
|
|||
|
GENERAL DESCRIPTION: SELCO SG-455 greases are high performance, extreme-pressure greases which combine a synthetic base fluid with a lithium complex soap thickener. The thickener system provides a high dropping point, excellent resistance to water wash, and a tenacious structural stability. The unique physical properties of the synthetic base oil, combined with selective additives, provide outstanding protection against wear, rust, corrosion and high temperature degradation. The wax-free feature of the synthetic base oil allows for low temperature mobility/pumpability and very low starting and running torque values. Also, the traction property of the synthetic base fluid in these greases is considerably lower than mineral oil, allowing for temperature reductions in the load zone of rolling element bearings. |
APPLICATION : SELCO SG-455/220 is recommended for industrial applications which need a lubricant that can perform normal functions yet go far beyond in terms of high and low temperatures and long-life performance. It is an NLGI Grade 2 grease having the cold temperature pumping resistance of most NLGI Grade 0 greases. It is a true wide temperature, multi service grease. SELCO SG-455/460 an NLGI Grade 1 ½ grease, is recommended for industrial applications at both high and low temperatures. It will provide outstanding bearing protection under heavy loads at low to moderately high speeds, and where water is a factor. SELCO SG-455/460 has performed extremely well in steel mill and paper mill applications. It also has proven to be an exceptional severe service automotive chassis grease. |
||
| PROPERTIES | 220 | 460 | Test Method |
| NLGI GRADE | 2 | 1 ½ | |
| Soap Type | Lithium Complex | Lithium Complex | |
| Structure, Visual | Smooth, Slight Tack | Smooth, Slight Tack | |
| Color, Visual | Red | Red | |
| Penetration, Worked | |||
| x 60 strokes | 280 | 305 | |
| x 10,000 strokes | 295 | 322 | ASTM D 217 |
| x 100,000 strokes | 305 | 334 | |
| Dropping Point °C | 246 | 246 | ASTM D 2265 |
| Viscosity of Oil Cst @ 40°C | 220 | 460 | ASTM D 445 |
| Viscosity of Oil Cst @ 100°C | 23.8 | 46.5 | |
| EP and Wear Protection | |||
| Four Ball Wear Test, Scar dia., mm, max | 0.65 | 0.8 | ASTM D 2266 |
| Four Ball EP Weld Load, kg | 250 | 250 | ASTM D 2596 |
| Load Wear Index | 45 | 49 | |
| Corrosion Prevention, Rust Test | Pass | Pass | ASTM D 1743 |
| Emcor/SKF Water Wash Test, IP 220 modified | 0/0 | 0/0 | |
| Water Washout, 79°C (175°F), wt % | 4 | 3 | ASTM D 1264 |
Material Safety Data
| 1. IDENTIFICATION
PRODUCT SG–455 SYNTHETIC GREASE Supplier YALE SYNTHLUBE INDUSTRIES T 5/5 ,World Trade Centre, Cuffe Parade Mumbai 400 005 Maharashtra India EMERGENCY TELEPHONE NO. 91-22-22183108/22186748, yale@vsnl.com
2. COMPOSITION Synthetic Ester Base Oil, Lithium Complex Soap, Proprietary additives
3. HAZARDS INDENTIFICATION Not classified as hazardous. Other Hazards:
4. FIRST-AID MEASURES RESPIRATORY SYSTEM Remove to fresh air and get medical attention. INGESTION Do not induce vomiting. Wash mouth out with water and obtain medical attention. EYES Rinse immediately with plenty of water for at least 10 minutes. Get Medical Attention. SKIN Remove contaminated clothing. Wash affected area with soap and water, get medical attention.
5. FIRE-FIGHTING METHODS Foam, carbon dioxide or dry power.
6. ACCIDENTAL RELEASE MEASURES Contain and absorb in sand or earth. Ensure no material enters drains or water courses. Dispose of as solid waste in accordance with the relevant waste disposal regulations.
7. STORAGE AND HANDLING Storage 1: Store in delivery packs in a cool dry place. HANDLING At ambient temperatures wear gloves overalls and eye protection. The work area should be adequately ventilated. No eating drinking or smoking in the work area.
8. EXPOSURE CONTROL / PERSONAL PROTECTION Exposure Standard: The substance with exposure limit is: Notation 1: Exposure Standard:2nd substance with exposure limit is: Notation 2:
PERSONAL PROTECTION Respiratory Protection: Type of Cartridge (if Applicable): Eye Protection : Safety Spectacles Hand Protection : Gloves butyl or nitrile rubber Industrial Hygiene : No eating drinking or smoking in the work area Ventilation: At room temperature handle in a well ventilated area. Use exhaust ventilation if exposure to flume or aerosol can occur.
|
PROTECTION AGAINST FIRE AND EXPLOSION
Combustible but not readily ignited. No explosion hazard.
EC SAFETY PHRASES Not classified as hazardous.
9. TYPICAL PROPERTIES :
Stability: Stable under normal conditions
10.STABILITY AND REACTIVITY HAZARDOUS REACTIONS Comments HAZARDOUS DECOMPOSITION PRODUCTS Thermal decomposition produces noxious fumes.
11.TOXICOLOGICAL INFORMATION LD50 Acute Oral Toxicity : > 5000:mg/Kg:Rat LC50 Acute Inhalation: :mg/1 : Eye Irritation: No : Rabbit Skin Irritation: No.: Rabbit Sensation: No : Further Information:
12.ECOLOGICAL INFORMATION LC50 (96 Hour): mg/1 EC50 (24 Hour): mg/1 Biodegradability (Coupled units):
13.DISPOSAL CONSIDERATIONS Solid material should be incinerated. Material absorbed on sand should be disposed of as solid waste.
14.TRANSPORT INFOMRATION IMDG No.: Not classified Packing Groups: IATA-DGR Class No.: Not classified TREMCARD: Not classified RID/ADR Class No.: Not classified Other Information
15.REGULATORY INFORMATION Classification and labeling according to EC Directives 67/548 Not classified as hazardous. EC Risk Phrases Not classified as hazardous. Other Hazardous EC Safety Phrases Not classified as hazardous
16.OTHER INFORMATION: PRODUCT SAFETY For safety reasons, it is IMPERATIVE that customer: – Ensure that all those within their control who use the products are supplied with all relevant information contained within the Material Safety Data Sheet and Technical Bulletin concerning the applications for which the product is designed and any instructions or warning |